*Troxler model 3450 and 3430/3440 Plus/Enhanced models are $549.00 due to software fee.
*Troxler model 3450 and 3430/3440 Plus/Enhanced models are $549.00 due to software fee.
CoreDry is an automatic system for rapid drying of material samples and objects. Use this device to remove moisture from your sample in minutes. The amount of moisture removed allows the users to determine moisture content in aggregates, core samples, gyratory samples, loose mixtures, pc boards, wood chips, pulp, loose paper, and many other materials. Dry weight can also be used for the determination of the density of objects in laboratory and field sites. Why wait hours or days for drying with fans and ovens when you can dry your samples in minutes with CoreDry. This system utilizes high vacuum technology and the PumpSaver™ for rapid and safe drying of material samples and objects. The samples stay cool during drying, which preserves the sample composition. With CoreDry, you get the same accurate dry weight as using the oven without degrading or changing the sample characteristics.
Let CoreDry dry your samples at room temperature in minutes not hours
The CoreDry, was introduced to the construction market in 2004. InstroTek’s CoreDry uses vacuum technology to rapidly and completely dry compacted asphalt samples and field cores in minutes. Place a field core, gyratory sample, or a sample of loose mixture in this innovative fully automatic, and fully integrated device, and, unlike older conventional methods, in minutes you have a completely dry sample.
Because CoreDry dries the sample at close to room temperature you will have the most accurate and repeatable dry sample weight for your calculation of density or for other tests requiring dry sample weight.
In just minutes, CoreDry can dry field cores. Now you can take a core sample from the field and measure its density in less than 20 minutes, saving you time and providing the confidence you need to continue producing quality pavements.
Moisture loss in the sample is based on vacuum and innovative electronic desiccation technology. The CoreDry cycles a flow of air and vacuum within a highly efficient moisture removal process. The system also contains an integrated electronic moisture trap to capture the moisture being removed from the sample. The CoreDry is the first product of its kind for rapid drying of compacted and loose asphalt mixtures. ASTM D7227 was developed and established based on CoreDry.
When you CoreDry your samples, you ensure your measured density values are accurate. Additionally, you can avoid conflicts with other testing agencies over variable QC/QA results and provide your paving crew the accurate information they need to construct quality pavements.
InstroTek is an industry leader in high-performance laboratory scales for asphalt, soil and concrete labs. Our customer service agents will work with you to ensure you get the units you need at the best possible price. With a wide selection of makes and models, InstroTek is a one-stop-shop for all your scale needs. Let us help you get the right scale at the right price.
PaveScan Mix Design Module (MDM), is an innovative system used to create a correlation between the dielectric value of the mix and the asphalt density at different percent air voids. This correlation can then be entered into the PaveScan, Non-nuclear Rolling Density Measurement System (RDM), and used as a powerful QC/QA tool for accurate density measurements of the entire asphalt pavement. Quality process control using PaveScan MDM and RDM means all pavements and longitudinal joints can be compacted to specification in real-time.
The InstroTek PaveScan Powered by GSSI Technology is the first non-nuclear rolling density system that provides real-time compaction and density data for the entire paving project. Proper compaction is the most important factor in producing long-lasting pavements. The PaveScan uses multiple sensors to continuously scan the entire pavement and provide a density profile of the entire paving project. The operator pushes the cart along the lane and gathers density data behind the asphalt rollers. The onboard computer displays density, compaction, a line graph, and a contour map of the measurements. This information is used by contractors and pavement engineers to assess the quality of the pavement.
The Smart-Jig is a completely independent testing jig with the first integrated load cell, electronics, and Bluetooth connectivity that makes capturing, reporting, and sharing data seamlessly.
InstroTek’s SmartLoader is a variable speed universal load frame that can perform a multitude of monotonic loading tests. The SmartLoader is perfect for Balanced Mix Design (BMD) testing and comes preprogrammed with a number of BMD tests, including IDEAL-CT (Cracking Test), IDEAL-RT (Rutting Test), IFIT, and LSU SCB test.
The Ignition Panel™ is a front panel upgrade for the NCAT Asphalt Content furnace. The NCAT Furnace is widely used in the asphalt industry for accurate determination of asphalt content and quality control of pavements. The Ignition Panel upgrades the current units with advanced electronic components and improves the functionality and efficiency of the furnace while preserving its accuracy, reliability, and user experience.
The InstroTek HWT-Pro is a comprehensive verification and diagnostic device for the Hamburg Wheel Tracker. The HWT-Pro can measure and report your machine's deviation from AASHTO T-324 calibration requirements. The HWT-Pro also follows the recommendations of NCHRP Project 20-07 Task 361 conducted at Louisiana State University.
The NEW eDry Upgrade Kit for the InstroTek CoreDry™ is the quickest and most effective method for drying asphalt emulsions. In less than 30 minutes, the CoreDry eDry Emulsion Kit can be used to dry up to 5 grams of asphalt emulsions. CoreDry’s patented vacuum technology allows pavement engineers to quickly determine the appropriate binder content and application rates while retaining the rheological properties of the binder.
The Asphalt Roller Compactor (ARC), now available through InstroTek, Inc., is the first unit developed based entirely on an electro-mechanical system. The compactor does not require hydraulic fluids or air pressure, which allows the users to produce repeatable and consistent samples. The asphalt slab produced with this compactor is much more representative; with aggregate orientation similar to samples compacted in the field.
The Asphalt Compatibility Tester (ACT) is a fast, straightforward method to evaluate the adhesion properties of asphalt binder and aggregates in the mixture. This test uses LED light and detection system to measure the color change that may occur as a result of ASTM D 3625 (Boil Test Method).
The new SMART 503, a drop-in upgrade for your CPN Hydroprobe, dramatically enhances the functionality and performance of your existing gauge. The upgrade is specifically designed to provide a variety of new, operator friendly features that bring today’s technology to the Hydroprobe . CPN’s SMART 503 offers a new 4 x 20 character backlit LCD, longer lasting lithium-ion batteries and the ability to store and download test data via a built-in USB port.
The Xplorer 2™ Upgrade is a simple drop-in replacement for the original Xplorer 3500 nuclear gauge electronics. This upgrade includes many advanced features. Installation only takes minutes and can be performed with just a few simple tools. Get your upgrade today and start taking advantage of these great new features!
The MC-3 Elite is InstroTek’s newest and most advanced nuclear density gauge. We’ve listened to feedback from our customers and made upgrades in all the right areas. MC-3 Elite features a simple operator interface, NEW large backlit LCD display, illuminated keypad, precision machined base and surface mount electronic technology. The gauge is built to withstand the toughest construction and testing environments and is derived from over 40 years of field experience.
The MC-1 Elite is the most accurate and easy-to-use moisture/density testing instrument available.
InstroTek Model 3500 Xplorer nuclear moisture density gauge is designed to provide superior performance, with design experience and expertise that is unmatched in our industry.
InstroTek’s AutoRice is an automatic control unit allowing laboratory technicians to conduct Maximum Specific Gravity tests with the press of a button.
InstroTek’s Auto_SCB is a precise and versatile device for conducting mechanical testing of asphalt mixtures at a fraction of the cost.
An innovative, non-nuclear method of determining SuperPave, Stone Matrix (SMA), and coarse mix asphalt air voids.
CoreDry is an automatic system for rapid drying of material samples and objects. Use this device to remove moisture from your sample in minutes.
M.i.S.T. (Moisture Induced Stress Tester) is designed as a totally new, quick, and logical method for testing moisture damage susceptibility of asphalt mixtures.
Offers several unique features that make testing safer, easier, and more accurate than existing more expensive wheel tracking systems.
Upgrade your 3411 with SmartPanel, and gain the same functionality and features of newer model gauges
The InstroTek NoNuke is a highly advanced dielectric asphalt density gauge specifically designed to increase accuracy and dependability.