Lab Scales

ValiDator® I & II

The ValiDator is patented, NIST traceable, & ISO/IEC 17025 Accredited technology that can verify your nuclear density gauge calibration at all measurement depths.

InstroTek is an industry leader in high-performance laboratory scales for asphalt, soil and concrete labs. Our customer service agents will work with you to ensure you get the units you need at the best possible price. With a wide selection of makes and models, InstroTek is a one-stop-shop for all your scale needs. Let us help you get the right scale at the right price.

PaveScan® Mix Design Module (MDM)

PaveScan Mix Design Module (MDM), is an innovative system used to create a correlation between the dielectric value of the mix and the asphalt density at different percent air voids. This correlation can then be entered into the PaveScan, Non-nuclear Rolling Density Measurement System (RDM), and used as a powerful QC/QA tool for accurate density measurements of the entire asphalt pavement. Quality process control using PaveScan MDM and RDM means all pavements and longitudinal joints can be compacted to specification in real-time.

PaveScan™- Density Meter

The InstroTek PaveScan Powered by GSSI Technology is the first non-nuclear rolling density system that provides real-time compaction and density data for the entire paving project. Proper compaction is the most important factor in producing long-lasting pavements. The PaveScan uses multiple sensors to continuously scan the entire pavement and provide a density profile of the entire paving project. The operator pushes the cart along the lane and gathers density data behind the asphalt rollers. The onboard computer displays density, compaction, a line graph, and a contour map of the measurements. This information is used by contractors and pavement engineers to assess the quality of the pavement.

Smart-Jig™

The Smart-Jig is a completely independent testing jig with the first integrated load cell, electronics, and Bluetooth connectivity that makes capturing, reporting, and sharing data seamlessly.

SmartLoader™

InstroTek’s SmartLoader is a variable speed universal load frame that can perform a multitude of monotonic loading tests. The SmartLoader is perfect for Balanced Mix Design (BMD) testing and comes preprogrammed with a number of BMD tests, including IDEAL-CT (Cracking Test), IDEAL-RT (Rutting Test), IFIT, and LSU SCB test.

The Ignition Panel™(AASHTO T 308 & ASTM D6307)

The Ignition Panel™ is a front panel upgrade for the NCAT Asphalt Content furnace. The NCAT Furnace is widely used in the asphalt industry for accurate determination of asphalt content and quality control of pavements. The Ignition Panel upgrades the current units with advanced electronic components and improves the functionality and efficiency of the furnace while preserving its accuracy, reliability, and user experience.

HWT-Pro™

The InstroTek HWT-Pro is a comprehensive verification and diagnostic device for the Hamburg Wheel Tracker. The HWT-Pro can measure and report your machine's deviation from AASHTO T-324 calibration requirements. The HWT-Pro also follows the recommendations of NCHRP Project 20-07 Task 361 conducted at Louisiana State University.

eDry™ Asphalt Emulsion Drying Kit

The NEW eDry Upgrade Kit for the InstroTek CoreDry™ is the quickest and most effective method for drying asphalt emulsions. In less than 30 minutes, the CoreDry eDry Emulsion Kit can be used to dry up to 5 grams of asphalt emulsions. CoreDry’s patented vacuum technology allows pavement engineers to quickly determine the appropriate binder content and application rates while retaining the rheological properties of the binder.

Asphalt Roller Compactor

The Asphalt Roller Compactor (ARC), now available through InstroTek, Inc., is the first unit developed based entirely on an electro-mechanical system. The compactor does not require hydraulic fluids or air pressure, which allows the users to produce repeatable and consistent samples. The asphalt slab produced with this compactor is much more representative; with aggregate orientation similar to samples compacted in the field.

ACT™ Asphalt Compatibility Tester

The Asphalt Compatibility Tester (ACT) is a fast, straightforward method to evaluate the adhesion properties of asphalt binder and aggregates in the mixture. This test uses LED light and detection system to measure the color change that may occur as a result of ASTM D 3625 (Boil Test Method).

SMART 503 Upgrade

The new SMART 503, a drop-in upgrade for your CPN Hydroprobe, dramatically enhances the functionality and performance of your existing gauge. The upgrade is specifically designed to provide a variety of new, operator friendly features that bring today’s technology to the Hydroprobe . CPN’s SMART 503 offers a new 4 x 20 character backlit LCD, longer lasting lithium-ion batteries and the ability to store and download test data via a built-in USB port.

Xplorer 3500 Upgrade

The Xplorer 2^™ Upgrade is a simple drop-in replacement for the original Xplorer 3500 nuclear gauge electronics. This upgrade includes many advanced features. Installation only takes minutes and can be performed with just a few simple tools. Get your upgrade today and start taking advantage of these great new features!

MC-3 Elite™- Advanced Nuclear Density Gauge

The MC-3 Elite is InstroTek’s newest and most advanced nuclear density gauge. We’ve listened to feedback from our customers and made upgrades in all the right areas. MC-3 Elite features a simple operator interface, NEW large backlit LCD display, illuminated keypad, precision machined base and surface mount electronic technology. The gauge is built to withstand the toughest construction and testing environments and is derived from over 40 years of field experience.

MC-1 Elite™- Moisture Testing Gauge

The MC-1 Elite is the most accurate and easy-to-use moisture/density testing instrument available.

Lab Scales

Related Products